《电子技术应用》
您所在的位置:首页 > 通信与网络 > 设计应用 > 低矢量幅度误差星载软件无线电平台硬件设计与实现
低矢量幅度误差星载软件无线电平台硬件设计与实现
电子技术应用
王忆蒙,马力科,胡洪
中国西南电子技术研究所
摘要: 为满足下一代卫星通信对高信号质量与频谱效率的需求,设计了一种集成多路并行接收发射通道、数字预失真模块、高速数据接口及重构与刷新电路架构的新型星载软件无线电(Software Defined Radio,SDR)平台。首先建立了相位噪声、非线性等关键损伤与矢量幅度误差(Error Vector Magnitude,EVM)的定量模型,据此为依据优化核心硬件电路设计,结合数字预失真算法对硬件残余非线性进行补偿。同时,通过抗辐照器件选型与动态刷新电路设计,保障平台低轨辐射环境下的长期功能完整。测试表明,在6GS/s采样率、8PSK调制及2X非归零模式下,平台2.2 GHz频点输出EVM低至3.31%。
中图分类号:TN 927+.23 文献标志码:A DOI: 10.16157/j.issn.0258-7998.267797
中文引用格式: 王忆蒙,马力科,胡洪. 低矢量幅度误差星载软件无线电平台硬件设计与实现[J]. 电子技术应用,2026,52(11):87-92.
英文引用格式: Wang Yimeng,Ma Like,Hu Hong. Hardware design and implementation of satellite-borne software-defined radio platform with low EVM[J]. Application of Electronic Technique,2026,52(11):87-92.
Hardware design and implementation of satellite-borne software-defined radio platform with low EVM
Wang Yimeng,Ma Like,Hu Hong
Southwest China Institute of Electronic Technology
Abstract: To address the requirements for high signal quality and spectral efficiency in next-generation satellite communications, this paper presents an innovation design for a satellite-borne software-defined radio(SDR) platform, integrating multi-parallel transceiving channels, a digital pre-distortion module, high-speed data interfaces, and a reconfigurable dynamic refresh circuit architecture. First, a quantitative model is constructed to characterize the relationship between key impairment such as phase noise and nonlinearity and error vector magnitude(EVM). Leveraging this model, the residual nonlinearity of the core hardware is compensated for via the integration of a digital pre-distortion algorithm. Meanwhile, the long-term functional integrity of the platform in low-orbit radiation environment is guaranteed through the adoption of radiation-hardened components and the implementation of dynamic refresh circuits. Test results demonstrate that at a sampling rate of 6GS/s, with 8PSK modulation and 2X non-return-to-zero(NRZ) mode, the EVM of the platform’s output at the 2.2 GHz frequency point is as low as 3.31%.
Key words : satellite-borne software-defined radio platform;error vector magnitude;digital pre-distortion;radiation-hardened design

引言

随着近年来低轨卫星互联网的热度越来越高,高带宽通信业务的需求越来越迫切,低轨星载通信系统正向着智能化、软件化和高通量的方向演进[1-2]。软件无线电技术采用标准化的硬件接口和软件架构[3],凭借其高度的灵活性与可重构特性[4],成为实现星上通信载荷多功能、在轨升级与自适应处理的核心技术。然而,星载环境受极端物理条件与复杂空间环境的双重制约[5],对通信链路的可靠性提出极高要求,这使得星载SDR平台的硬件性能面临巨大挑战。

矢量幅度误差作为衡量数字通信质量的关键指标,直接反映了调制信号的精度,其指标优劣程度直接影响通信系统的误码率、频谱利用率和有效数据吞吐量[6]。目前,针对SDR平台EVM优化的主要方法集中于数字信号处理算法领域。例如,通过数字预失真(Digital Pre-Distortion,DPD)来补偿功率放大器的非线性[7],或通过自适应均衡技术[8](Adaptive Equalization Technology,AET)对抗信道畸变。

国内低轨高带宽通信使用的频段高,高频段的模拟功放芯片使用较少,迭代不够充分,射频指标无法保持高水准。因此,仍然需要通过数字算法的补偿,将中频处理通道与射频处理通道上带来的幅度相位误差进行进一步优化,为宽带高速通信提供高信噪比的初始发射信号条件。

本文设计并实现了一款面向高性能星载应用的SDR平台,通过系统性的硬件设计并结合DPD算法,从根源上优化EVM性能。对推动我国未来高通量卫星、低轨卫星等系统的核心技术发展具有一定的参考价值。


本文详细内容请下载:

https://www.chinaaet.com/resource/share/2000007351


作者信息:

王忆蒙,马力科,胡洪

(中国西南电子技术研究所,四川 成都 610036)

2.jpg

此内容为AET网站原创,未经授权禁止转载。