《电子技术应用》
您所在的位置:首页 > 通信与网络 > 设计应用 > 多速率多分辨率接收架构和鉴相方法研究
多速率多分辨率接收架构和鉴相方法研究
电子技术应用
肖岚,成章
中国电子科技集团公司第二十九研究所
摘要: 传统宽带干涉仪测向系统采用高采样速率、高分辨率多通道接收机接收信号并进行鉴相处理,高速、高分辨导致采集、传输、处理各环节资源消耗大,微小平台应用受限。为降低宽带测向系统硬件规模,从宽带干涉仪测向机理出发,研究多采样速率、多分辨率的异构接收机,提出宽窄带结合的多通道接收机架构和鉴相处理方法,降低部分通道的转换速率和分辨率,从而降低传输处理数据量。仿真和实验表明,该架构和处理方法可确保接收机核心指标满足工程应用的前提下,实现SWaP-C(尺寸、重量、功耗和成本)指标的提升,为微小型平台实现宽带测向能力奠定了坚实基础。
中图分类号:TN971 文献标志码:A DOI: 10.16157/j.issn.0258-7998.267939
中文引用格式: 肖岚,成章. 多速率多分辨率接收架构和鉴相方法研究[J]. 电子技术应用,2026,52(11):148-153.
英文引用格式: Xiao Lan,Cheng Zhang. Research on multi-rate and multi-resolution receiving architecture and phase discrimination method[J]. Application of Electronic Technique,2026,52(11):148-153.
Research on multi-rate and multi-resolution receiving architecture and phase discrimination method
Xiao Lan,Cheng Zhang
The 29th Research Institute of China Electronics Technology Group Corporation
Abstract: Traditional broadband interferometer direction-finding systems adopt high sampling rate and high-resolution multi-channel receivers to receive signals and perform phase discrimination processing. High speed and high resolution lead to large resource consumption in acquisition, transmission and processing links, limiting the application on micro platforms. To reduce the hardware scale of broadband direction-finding systems, starting from the direction-finding mechanism of broadband interferometers, heterogeneous receivers with multi-sampling rates and multi-resolutions are studied. A multi-channel receiver architecture combining wide and narrow bands and a phase discrimination processing method are proposed, which reduce the conversion rate and resolution of some channels, thus decreasing the amount of data for transmission and processing. Simulations and experiments show that the architecture and processing method can ensure the core indicators of the receiver meet the requirements of engineering applications, and realize the improvement of SWaP-C (Size, Weight, Power and Cost) indicators, laying a solid foundation for micro platforms to achieve broadband direction-finding capabilities.
Key words : multi-sampling rate;multi-resolution;broadband interferometer;phase discrimination processing

引言

干涉仪测向体制具备角度覆盖广、测向精度高、适应信号能力强等优点,因此常作为通用标准单元,广泛应用于宽带测向装置[1-2]。干涉仪接收机通常由多个相同采样速率和相同分辨率的接收通道组成,各接收通道连接分布在空间不同位置的天线,通过测量各天线感知信号的相位差,结合基线信息计算来波方向。测向精度由基线长度、相位差测量精度决定,因此各类文献对测向基线、相位差测量精度进行了大量研究[3-5]。但是为满足宽带应用需求,各通道均按照奈奎斯特采样定理,采用高速AD转换器,高速即高采样率,势必带来海量数据流的传输、处理问题,导致接收机规模、成本、功耗问题。如何降低采样、传输、处理代价,解决带宽、精度与硬件规模的矛盾是工程化应用重点关注的问题[4]。降低采样率和分辨率可以有效降低数据量,从而减少传输处理代价,如基于压缩采样理论可以在保证带宽前提下降低采样速率,但目前研究主要集中针对稀疏信号以低于奈奎斯特频率的速度进行全局观测而非局部采样,然后用适当的重建算法从观测值中还原出原始信号[6-7]。同时,压缩采样可能会导致噪声折叠问题,影响接收机灵敏度指标。降低AD分辨率或通道数量也可以降低数据量。近年来对低分辨率AD的系统设计和相关信号处理技术开展了大量研究,但主要集中在通信、MIMO系统、单比特宽带截获系统领域[8-11],时间调制的单通道框架下多基线相位干涉仪测向方法可以降低通道数量[12],但相位差是分时测量的,若在调制周期内被测目标的方位发生快速变化,各基线的相位信息将对应不同的目标方位,解模糊算法基于“目标方位不变”的假设失效,极易出现解模糊错误。

为减小干涉仪测向应用的宽带多通道接收机硬件规模问题,本文通过分析干涉仪测向机理,结合测向处理流程和影响测向精度的核心要素,对传统宽带干涉仪测向架构进行改进,仅通过对多通道接收机采样速率和分辨率进行优化,进行多速率、多分辨率鉴相处理,避免复杂的算法,直接降低数据吞吐量,减少处理资源开销,提升宽带干涉仪测向系统SWaP-C(Size, Weight, Power and Cost,体积、重量、功耗和成本)指标,进而改善其面向微小平台应用的装机适应性,通过理论分析与仿真和实测验证了该方法的有效性,为工程应用提供了新的参考。


本文详细内容请下载:

https://www.chinaaet.com/resource/share/2000007361


作者信息:

肖岚,成章

(中国电子科技集团公司第二十九研究所,四川 成都 610036)

2.jpg

此内容为AET网站原创,未经授权禁止转载。