《电子技术应用》
您所在的位置:首页 > 嵌入式技术 > 设计应用 > 动态部分重构在目标检测预处理中的研究与实现
动态部分重构在目标检测预处理中的研究与实现
电子技术应用
韩德强,孔建周,王宗侠,杨淇善
北京工业大学 计算机学院
摘要: 随着人工智能技术的发展,目标检测算法已广泛应用于各个领域。针对复杂场景无法根据复杂多变的环境自适应调整的问题,结合动态可重构技术,提出了一种将其与目标检测预处理相结合的方法,首先设计不同功能的预处理模块,随后进行相应的动态重构设计,实现了一种可灵活重构的系统架构。该系统架构可以实现不同复杂场景下预处理模块的自适应加载与切换,系统资源使用减少67%。结果表明,该系统可以实现不同预处理功能在边缘端的高效部署,且不影响系统的实时推理。
中图分类号:TP183 文献标志码:A DOI: 10.16157/j.issn.0258-7998.268053
中文引用格式: 韩德强,孔建周,王宗侠,等. 动态部分重构在目标检测预处理中的研究与实现[J]. 电子技术应用,2026,52(11):1-7.
英文引用格式: Han Deqiang,Kong Jianzhou,Wang Zongxia,et al. Research and implementation of object detection preprocessing based on dynamic partial reconfiguration[J]. Application of Electronic Technique,2026,52(11):1-7.
Research and implementation of object detection preprocessing based on dynamic partial reconfiguration
Han Deqiang,Kong Jianzhou,Wang Zongxia,Yang Qishan
School of Computer Science,Beijing University of Technology
Abstract: With the development of artificial intelligence technology, object detection algorithms have been widely applied in various fields. To address the problem that complex scenarios cannot adaptively adjust according to complex and variable environments, a method combining it with target detection preprocessing is proposed in conjunction with dynamic reconfigurable technology. Firstly, preprocessing modules with different functions are designed, and then corresponding dynamic reconfiguration design is carried out, achieving a flexibly reconfigurable system architecture. This system architecture can achieve adaptive loading and switching of preprocessing modules under different complex scenarios, reducing the system resource usage by 67%. The results show that the system can efficiently deploy different preprocessing functions at the edge without affecting real-time inference.
Key words : dynamic partial reconfiguration;object detection;preprocessing;embedded

引言

随着人工智能技术的飞速发展,目标检测作为计算机视觉领域的核心任务[1],已广泛应用于智能监控、自动驾驶[2]、工业检测等多个实际场景。在嵌入式与边缘计算场景中,一套完整的目标检测系统通常包括预处理、模型推理加速、结果后处理三大关键环节,各模块协同工作,共同决定系统的检测精度与运行效率。其中,图像预处理作为数据输入的第一道流程,承担着图像去噪、归一化、对比度增强等功能,直接影响后续推理阶段的特征提取与最终检测精度[3-4];然而传统目标检测系统的预处理模块多采用固定架构设计[5],无法根据复杂多变的环境自适应调整处理策略,导致检测精度下降和硬件资源的浪费[6]。

FPGA(Field Programmable Gate Array,现场可编程门阵列)支持全局和部分动态可重构,全局动态可重构需要将FPGA所有逻辑资源进行重加载覆盖;部分动态可重构则无需中断系统运行即可重新加载,以下将部分动态可重构简称为动态重构。动态重构的早期研究实现了功能模块的按需加载与切换[7-8]。将动态重构技术应用于目标检测系统的预处理环节,可有效解决传统固定架构的局限性:通过检测场景的实时特征分析,自适应加载最优预处理模块,既能提升不同场景下的检测精度,又能避免冗余模块占用硬件资源,成为边缘计算场景下目标检测系统的优化方向。


本文详细内容请下载:

https://www.chinaaet.com/resource/share/2000007338


作者信息:

韩德强,孔建周,王宗侠,杨淇善

(北京工业大学 计算机学院,北京 100124)

2.jpg

此内容为AET网站原创,未经授权禁止转载。